Surplus electrical cable and wire · Greater Austin and Central Texas

Austin TexasElectrical wire buyers
Williamson County · service area

We buy surplus electrical cable in Leander

Leander releases lots in phases, and every phase leaves cable behind. Pallets of URD, USE-2 and SER, some never opened, some down to a broken reel. We buy both shapes of leftover.

  • Williamson County
  • 183A and the CapMetro rail line
  • Pickup or freight
Large wooden cable reels stacked on end beside a red shipping container in an outdoor yard
Buying desk · Leander, Greater Austin

Send the lot

Six details are enough to start: what the cable is, how much there is, where it is and what condition it is in. Photos can follow by text or email.

Prefer to talk 954-740-1983

saleselectricalbuyers@gmail.com

No fee and no obligation. A buyer reviews the lot from these details. Nothing moves until written lot terms are agreed.

Volume home building is a repeating loop here. The 183A corridor and the ground beside the rail line fill in one phase at a time, and each phase ends with underground cable that was ordered for a count of lots that changed after the original takeoff was drawn.

We buy the residue of that loop: full pallets, partial pallets, broken reel quantities and service cable cut off a coil. A superintendent can list several subdivisions in one submission, which is usually the fastest way to clear a crowded compound before the next phase starts.

What a lot release leaves at the compound

URD and USE-2 arrive on pallets, banded four or six reels to a pallet, and the count rarely matches the final lot release. SER for service risers comes in coils and short reels that get split between framing crews and trim crews, then forgotten.

A broken reel is still a lot. If half a pallet went out to the field, the remaining reels are reviewed on tag, length and jacket, the same way a full pallet would be. Tell us which reels were opened and which stayed banded.

Street lighting, signal and the widened edge

Road widening along 183A and the Ronald Reagan corridor moves duct, pull boxes and lighting circuits. Street lighting cable comes out in long runs when a pole line is relocated, and signal cable comes out in short ones with splices in the middle of a run.

Keep the two apart in a submission. Lighting conductor is usually a clean, long length with a readable jacket. Signal and interconnect cable is multi-conductor, often spliced, and is read as recovery unless the sheath is intact and dry along the whole pull.

Small industrial and self-storage on the north edge

The north edge of Leander is where the smaller buildings are: storage yards, light industrial bays, a few boat and RV compounds. Those jobs produce feeder and panel cable in modest quantities, plus site lighting run in conduit and a little tray in the office end.

Modest does not mean skip it. A single bay turnover can leave a service feeder, a length of tray cable and a box of THHN. Photograph the panel schedule together with the reel tags, and the whole review takes one pass.

At a glance

What this page covers

The rows a buyer would fill in when reviewing this kind of lot. If your cable matches most of them, the submission is ready.

Lot review sheet
CountyWilliamson County
Corridors183A, US-183, Ronald Reagan Blvd
RailCapMetro Red Line corridor
Typical stockURD, USE-2, SER, street lighting cable
Lot shapesFull pallets, partial pallets, broken reels
AccessFenced compounds, gate contact needed
Local notes

The rail line, the toll road and a compound address

Leander grew along the Red Line and 183A, and the two do not meet the way a grid does. There are cul-de-sacs, greenbelt edges and streets that are paved before they are named, so an address alone rarely gets a truck to the right gate.

Send the cross streets, the gate process and where the reels actually sit. Loading is arranged once terms are agreed. Freight works as well as a local truck when a compound is short on turning room or the gate is narrow for a trailer.

Questions

Sellers ask

Can a superintendent submit several subdivisions at once?

Yes, and it is the better way. List each subdivision, the phase, the reel or pallet count and the compound address. One consolidated pickup is easier to schedule than four small ones.

How do you handle a broken reel with no footage left?

We weigh it and measure the wrap depth. With the conductor size and jacket type from the tag or the print, remaining footage comes out close enough to review. Say whether the reel has been sitting outside.

Do you take partial pallets of mixed sizes?

Yes, if the sizes are listed. A pallet of four reels in two sizes is simple. A pallet of loose coils in six sizes needs each group labelled, or the review slows down while we sort it.

What access do you need at a fenced compound?

Gate width, turning room and whether a forklift or telehandler is available. Reels on a trailer can be rolled by hand. Pallets usually cannot, and a loaded pallet needs a machine or a ramp.

Buying desk · Leander, Greater Austin

Send the reel list

Six details are enough to start: what the cable is, how much there is, where it is and what condition it is in. Photos can follow by text or email.

Prefer to talk 954-740-1983

saleselectricalbuyers@gmail.com

No fee and no obligation. A buyer reviews the lot from these details. Nothing moves until written lot terms are agreed.

Call 954-740-1983 Request a Quote