We buy surplus electrical cable at The Domain
Tenant improvement work at The Domain leaves cable above the ceiling every time a floor changes hands. We buy the MC, the Cat6, the busway sections and the shell-space feeder, and we settle the paperwork before anything moves.
Send the lot
Six details are enough to start: what the cable is, how much there is, where it is and what condition it is in. Photos can follow by text or email.
Prefer to talk 954-740-1983A tenant improvement is a short, contained job that produces a predictable set of leftovers. The ceiling opens, the old layout comes out, the new layout goes in, and whatever was ordered for the previous plan is still sitting on the floor when the crew leaves.
At The Domain that cycle runs constantly across offices, retail shells and the tech buildings along Burnet Road. Each fit-out leaves feeder, MC and structured cable behind, and each one is small enough that nobody wants to run a separate disposal trip for it. The material collects in a storage room instead.
What a fit-out leaves above the ceiling
MC and AC come out of the ceiling grid as short, armored runs between junction boxes. Cat6 arrives as boxes of part-used cable and as patch bundles pulled out of a rack. Plug-in busway sections come down when a floor plate is re-planned.
The MC and AC are reviewed by jacket, conductor and length. The Cat6 is reviewed by box, by category and by whether the reel or box is still sealed. Busway is reviewed by section length and by whether the joint packs and end caps came down with it.
Shell space, subdivided floors and busway cuts
A shell space holds the service and the feeder for a floor that has no tenant yet. When a tenant finally arrives, the electrical room is reworked, the feeder is re-terminated, and the surplus is whatever was pulled for the previous arrangement.
Subdividing a floor plate is where busway runs get cut. A run that served one tenant becomes two shorter runs with a new tap, and the removed sections are still usable if the cut ends are clean and the section lengths are recorded.
Garage lighting cable and the property manager's file
Parking garages and site lighting produce their own surplus during a re-lamp or a re-feed. Fixture whips, feed cable from a garage panel, and the underground runs replaced during a lot remodel all come out in lengths that are easy to overlook.
Before cable leaves a leased floor, the property manager usually needs a removal authorization from the tenant, a list of what is going, and a dock or freight elevator booking. Send those constraints with the photographs and the pickup is planned around them.
What this page covers
The rows a buyer would fill in when reviewing this kind of lot. If your cable matches most of them, the submission is ready.
| County | Travis County |
|---|---|
| Corridors | Domain Drive, Burnet Road, Braker Lane |
| Typical stock | MC, AC, Cat6, plug-in busway, feeder |
| Building type | Office, retail shell, parking garage |
| Access | Docks, freight elevators, service corridors |
| Pickup | Scheduled once terms are agreed |
Between MoPac and Burnet Road
The Domain sits in a grid of surface lots and garages north of Braker, with office buildings and retail blocks packed into a few hundred acres. Loading is structured: docks, service corridors, freight elevators and rules about when a truck may stand.
Burnet Road carries the older tech offices, low buildings with surface parking and a single electrical room. Those buildings turn over tenants more quietly than the Domain does, and the surplus tends to sit in a storage cage for a year before anyone lists it.
Sellers ask
Do we need the tenant's permission to remove cable?
Get it in writing before the pickup. A short authorization from the tenant or the property manager naming the material and the date is usually enough for building security, and it protects everyone if the floor is inspected later.
Is part-used Cat6 worth including?
Yes. Boxes and part reels are reviewed by category, by box count and by how much is left. Keep the boxes closed and note the category on each one, because the print on a Cat6 jacket is hard to read in a photograph.
Can busway be reviewed after it is cut out?
Yes, if you record the section lengths and keep the joint packs. Photograph the cut ends and the label on each section, and lay the sections out in order for one overview shot.
Who signs for the cable when it leaves the floor?
Whoever the property manager nominates. We ask for a name and a contact at the dock, and the pickup is scheduled once terms are agreed, so the sign-off happens at a time the building has approved.
Send the reel list
Six details are enough to start: what the cable is, how much there is, where it is and what condition it is in. Photos can follow by text or email.
Prefer to talk 954-740-1983